Models > MH1150XMS1 > Instructions

MH1150XMS1 Whirlpool Microwave - Instructions

All Instructions for the MH1150XMS1
151 - 165 of 232
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
plastic holders broke on our vent grille
We took off the old grille - and simply screwed on the new one. Easy peasy.
Parts Used:
Vent Grille
  • kristen from poynette, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grille tabs were broken
Replaced it with a new vent grill simply by screwing in on. It works and looks great.
Parts Used:
Vent Grille - Black
  • Debbie from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Vent grill on my microwave broke
I was in a panic as no one in our twon had this part. I found PartSelect online and ordered the part. I ordered this part at 4PM and the next day at 2PM the part was at my house. My husband spent 30 seconds screwing it back on and it looks like new. I can't say enough wonderful things about your Company and Customer Service!!! You're the BEST!!!
Parts Used:
Vent Grille - Black
  • Lori from Sonora, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent was Broken.
I, carefully, inserted the bottom tabs into the appropriate slots. I then rotated the vent piece up and into place under the top lip of the Microwave. Once positioned I installed the screws required to hold the piece in place. Very simple replacement. It gave me a chance to clean the grease behind the vent.
Parts Used:
Vent Grille
  • Tom from Missoula, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grill plastic parts broke off so it would fall off the mircrowave
Took screws off of old vent grille and installed new one. Very easy except my old one was a shiny black grille and this one has a matte finish. Description did not say which but I am fine with the part.
Parts Used:
Vent Grille - Black
  • Emma from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic vent on microwave was cracked and would no longer stay on.
Removed the broken parts and screws and placed the new vent on and tightened screws. I am an 76 year old woman, so if I could do this, then anyone can! Surprisingly easy to install.
Parts Used:
Vent Grille
  • Shirley from Coconut Creek, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
vent grill broken at installation screw
old vent off screwed new in less than a minute
Parts Used:
Vent Grille
  • Tim from Palm Harbor, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the part disintegrated from heat and grease.
two screws placed at the ends of the part secured it to the microwave oven body.
Parts Used:
Vent Grille
  • gary from jacksonville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The grill that was in place was sagging onto the microwave door
We visited our daughter and son-in-law for Thanksgiving. They asked if I could fasten it so it would stop sagging onto the microwave door. As I looked, I found the screw fasteners were both broken out and the grill was just resting in place. While Thanksgiving dinner was being completed I looked online, found the replacement part and ordered it. The amazing delivery... Ordered on Thursday and delivered on Saturday. It only took a couple of minutes to get the step stool and screwdriver. Then I completed installing the replacement grill.
Parts Used:
Vent Grille - Black
  • Lincoln from Spring Hill, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old part broken
Replaced vent with 2 screws. Very easy.
Parts Used:
Vent Grille
  • Steve from Foley, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
vent grille was knocked loosesomehow. allthe holes for the screws were broken
Removed the screws from the damaged sections and replaced the new vent grille. Less than 5 minute fix, and saved me over a 100 dollars according to the quote I got. Thanks
Parts Used:
Vent Grille - Black
  • Benita from Port Orange, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grill had fallen and cracked
Replacement part was perfect and a quarter the price of the brand name grill. Snapped it in, tightened 2 screws, done! Also delivery of the part was almost overnight. You guys are the greatest.
Parts Used:
Vent Grille
  • Barry from Boca Raton, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Parts Used:
R CERAMIC FUSE,20A/250V,MHC
  • Herb from Auburn, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Foreclosed home: parts were missing
Having the correct model number helps:
Just place the parts in the microwave and it worked.
Parts Used:
RING-TURN Glass Cooking Tray
  • OLIV from OAKLEY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grill was broken
Just remove the old one, inserted the new grill and tightened the screws on the top of the microwave.
Parts Used:
Vent Grille - Black
  • Sadagopan from Frisco, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MH1150XMS1
151 - 165 of 232
Back to Top