Models > MFI2568AEW Maytag > Instructions

MFI2568AEW Maytag Refrigerator - Instructions

All installation instructions for MFI2568AEW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MFI2568AEW
391-405 of 547
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

THE CENTER RAIL WAS CRACKED AND THE SHELF RAIL ALSO HAD A CRACK IN IT

  • Customer: Anna from Worchester MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
THE REPAIR WAS VERY EASY .. THERE WAS NO TOOLS REQUIRED.THE SHELF RAIL JUST SNAPPED IN AND OUT VERY EASY

door slamed and broke the two pins on deli tray end caps

  • Customer: james from lake worth FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
broke pins wed. morning ordered end caps wed. afternoon parts arrived next morning at 9:30 had it fixed by 11:30 30min repair time and i'mm 77years old. Out standing service. Removed veg. trays removed glass above deli tray removed broken pantry end caps installed new end caps two screws each.Very easy,took less than 30 min. Thanks

Broken tab on right side of meat/cheese lid

  • Customer: James from Dewitt MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
1.remove upper cold storage bins 2.rremove top glass on lower storage meat/cheese bin. 3.remove trim parts from front and rear 4. remove bin 5. remove trim pieces and slider mechanism from right side and back. 6. replace with new parts. 7. clean out gunk which accumulated on bottom of fridge. 8. reassemble in reverse order 9. Took longer than anticipated...over one hour.

Moved into a new apartment and this part was missing from the refrigerator so the bottom crisper was not functional.

  • Customer: Linda from Biscayne Park FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Was a very tight fitting part and it had to be gently tapped into place.

CENTER RAIL END TAP SNAPPED OFF, AND CRISPER DRAWER BROKE HINGE TAB

  • Customer: William from Ridgely MD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
REMOVED BOTH VEGGIE CRISPER AND LOWER CENTER CRISPER, REMOVED GLASS SHELVES, REMOVED BROKEN SIDE PANTRY END CAP TWO SCREW, TWO WERE MISSING. HARDEST PART WAS TO REMOVE THE REAR ADJUSTABLE PIECE AND INSTALL ON NEW END CAP. GLAD I TOOK MY TIME AS THE CENTER RAIL WILL PROBABLY HAVE TO BE REPLACED AGAIN. POOR DESIGN, NUMEROUS OTHER COMMENTS SAY THE SAME THING. BEST PART OF THE REPAIR WAS ORDERING FROM PARTSELECT.CO, SHIPPED ON TIME AND ORDERING WAS EASY WITH COMPLETE PARTS DIAGRAMS.

Broken tab holding the bottom drawer cover in place

  • Customer: Richard from Naperville IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the drawers and glass. Removed two screws holding the end cap in place. Reversed process for new piece. Really really simple. Don't pay somebody else to do this.

peg to flip lid to drawer broke

  • Customer: brett from arvada CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
biggest time was the cleaning of the area ;-) for the actual work it was less than 10 mins to replace. remove the three screws and there are two tabs on the back of the replacement part that you need to line up with the slots in the back and it simply snaps in place - put the screws back and you're done

broken hinge pin for deli drawer cover

  • Customer: Robert from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I followed instructions provided by others on this page. I can't believe how easy it was.

Hinge joint separated from lid

  • Customer: Marcia from Ridgecrest CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Found "pegs" either side of drawer found "holes on side of lid pushed holes on side of lid onto pegs.

left side pin broken on pantry end cap

  • Customer: Terry from Anaconda MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed all plastic drawers and glass shelf. removed two screws holding the part to the side. Removed the slider metal part and placed it on the new part. Reversed the process, project complete.

Broken plastic dowel

  • Customer: Jerry from LA CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed three screws and took off broken side. Then I unscrewed three screws and removed and replaced drawer slider. I then replaced old side with the new one.Thanks you for making this so easy.

no instructions, but none were needed for the particular part.

  • Customer: Isaac from Gonzales LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply snapped it into place, removing the protective covering during the process. Although the cost of the part was higher than expected for a simple piece of clear molded plastic, the whole job took about two minutes total. And, moreover, the part arrived two days earlier than I anticipated.

Right side pantry drawer lid clip broke it

  • Customer: Dario from East Haven CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Removed the drawer you need 1/4 socket removed three bolts very easy took me 15 minute

The little part that fits into the hole of the deli tray door broke apart from the panel on the right side of the refrigerator.

  • Customer: Miranda from Kansas City MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
There are two screws that holds the panel on. I took the screws out pulled the panel and attachments out. Removed the attachments from the old panel put them on the new panel. It was really easy to figure out how to fit the pieces back together. Screwed the panel and attachments back into to place and perfect. I Put the door back on the deli tray. No readjusting was necessary at all good as new fits great no problems. You pull the tray out the door flips up every thing works fine.

broke tab off hinge on left side..have had for 4 yrs

  • Customer: Bill from Denver CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Nutdriver....removed crispers.......pulled drawer. While drawer slide pulled out...removed 1 screw. Removed second screw. After looking at new on I understood had to pull up a bit while removing to clear taps at front and back.I am a handy kinda fella that fixes everything tho"
All Instructions for the MFI2568AEW
391-405 of 547