Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MFD2560HES > Parts

MFD2560HES Maytag Refrigerator - Parts

All parts for the Maytag Refrigerator MFD2560HES

Below is a list of all parts for the Maytag Refrigerator MFD2560HES - Bottom Freezer. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the MFD2560HES
15-28 of 230
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$103.25

Crisper Frame

Glass NOT included. If you are looking for the center rail see related parts below.

$4.87

Screw

Sold individually.

$30.23

Fan Blade

Used with Evaporator Fan Motors.

$19.63

Light Switch - 2 Terminal

The light switch terminal is used in refrigerators and freezers to help you see inside your appliance by turning on when the fridge door is open and turning off when the door is closed. The measurements of this part are: 1.12 inches in length, 1 inch in width, 1.75 inches in height and 0.026 pounds in weight. If your light switch terminal is damaged or the light does not turn on when fridge door is open, replacing the light switch terminal can solve the problem. As a safety precaution, remember to unplug your fridge from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions and a detailed guide.

$32.03

Thermistor

Long harness thermistor kit.

$94.85

Vertical Mullion Rail - Black

$6.54

Toe Grille Clip

Sold individually.

$83.75

Crisper Glass Shelf Insert

Frame not included.

$4.89

Pivot Block

$25.52

Icemaker Shut-Off Arm

The icemaker shut off arm, used in a refrigerator, gives the icemaker a signal to stop making ice once the bin has a reached a certain limit. This helps monitor ice production. If your icemaker is not making ice properly or consistently, replacing this part could be a solution to your problem. The tools required for this installation are a 1/4 inch nut driver, a Phillips screwdriver, and needle nose pliers. Refer to the manual guide provided by the manufacturer for further guidance and instructions. Remember to safely store food when the refrigerator power is off to keep it from deteriorating.

$16.54

Butterfly Handle Mount

This mount is used to connect the handle and trim together. Sold individually.

$60.83

Crisper Pan

$38.79

Defrost Thermostat

This defrost thermostat is a temperature sensing mechanism used in freezers and refrigerators. The thermostat senses the rise in evaporator temperature during a defrost cycle and t...

$17.88

Water Fill Cup and Bearing

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. This water fill cup is a genuine OEM part and will fit most refrigerators, but check the list of compatible brands to make sure yours is included before purchasing.

All Parts for the MFD2560HES
15-28 of 230