Enter the code TAKE10OFF at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on May 28 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door wasn't closing correctly.
My husband removed the old hinge, by taking out the old screws and the old hinge and attached the new one, by inserting the new hinge and the new screws. It was as easy as 123.
Took out the screws(8mm). Used pliers to close new hinges. Re-installed the screws with as large washers as would fit(to hopefully prevent the hinges from cracking at the screw holes like the originals did). I like this supplier, part was easy to find, correct part, shipped fast, price was good.
I popped out all the little plastic rivets for reuse with a needlenose pliers. There was a lot of ice built up in the insulation. I rested the inner lid on top of the freezer box to protect the stuff in the freezer and catch anything I might drop. I used a hair dryer to slowly melt the ice enough to extract it without losing too much insulation (this is why the job took more than 20 minutes). Once this was done, I tucked the insulation into the lid. I fit the new gasket on the new inner lid and placed it into its opening. I then started placing the rivets. I did the corners first to hold it up. I was able to push most of them by hand. For a few I used the edge of my pliers. Good as new.