Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDG5500AWW > Parts

MDG5500AWW Maytag Dryer - Parts

All parts for the Maytag Dryer MDG5500AWW

Below is a list of all parts for the Maytag Dryer MDG5500AWW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the MDG5500AWW
15-28 of 148
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$27.01

Tall Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle. NOTE: Screws are NOT included.

$9.56

Light Bulb - 10W

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

$16.03

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$18.75

Door Switch Kit

This part replaces older two terminal switches.

$9.82

Blower Wheel Clamp

This blower wheel clamp is less than an inch long and is used for some clothes dryers. This green clamp is made of metal.

$16.88

Idler Arm and Shaft

This arm is what attaches to the idler pulley wheel.

$7.57

RING-E

This idler shaft retaining ring is well under an inch long and is made of metal.

$41.20

Cycling Thermostat - Limit: 135/155

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.

$4.02

Rubber Leveling Leg Foot Pad

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter.

$21.60

High Limit Thermostat

This high limit thermostat is about an inch and a half long. This thermostat will cut out when the internal temperature of your dryer reaches 240 degrees Fahrenheit, and cut back in when the temperature drops forty degrees.

$2.80

Roller Shaft Hex Nut

This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

$7.33

Idler Arm Screw Sleeve

This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.

$4.90

Screw

This screw is sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

All Parts for the MDG5500AWW
15-28 of 148