MDE6000AYW Maytag Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer produced no heat.
I searched for possible symptoms and viewed a video about how to remove the heating element. There were three possible parts listed for this symptom: Thermostat, thermal coupling and heating element. I decided to check the heating element continuity, so I removed the heating element. Once I looked at the heating element, I could see a break in the heating coil, so I know the problem. I put my existing thermostat on the new heating element, plugged in 4 wires and installed two screws to secure the heating element, then reinstalled the front cover to the dryer.
Parts Used:
-
Mike from Boulder, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
It was making a lot of noises
IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you
Parts Used:
-
Margaret from Bedford, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!