Models > MDE21PDDGW

MDE21PDDGW Maytag Dryer - Overview

Get Parts and Repair Help for MDE21PDDGW

If you know the dryer repair part you need, you can browse the list of all parts on the MDE21PDDGW, or you can search by name or part description. You can also find your part by where it is located on the MDE21PDDGW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE21PDDGW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.73

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$12.51

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

$5.59

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$17.81

Multi-Rib Belt

At 91-5/8" long, this dryer drum belt has 5 ridges and is 3/8" wide.

$9.01

Idler Pulley Wheel and Bearing

This wheel spins on the pulley shaft.

$2.70

Retaining Ring

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$9.06

Drum Felt Seal

This seal can be used for the front or rear drum. Adhesive is NOT included.

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$11.78

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer squeeking

  • Customer: gerald from park city MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 389 of 397 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

catch mounted on door broke

  • Customer: Paul from Mt. Pleasant SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 43 of 56 people found this instruction helpful
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. read more

dried too many shoes and broke the baffles

  • Customer: Teresa from Pace FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 37 of 39 people found this instruction helpful
removed door, removed screws to lift top panel, removed screws that held old baffles, replaced with new baffles, took off front panel and cleaned out excess lint while I was in there. read more