MDE17MNAGW0 Maytag Dryer - Instructions

removed old one, threw it away, and inserted new one.

The videos really make it easy. I put my laptop on the washer next to my dryer and proceeded step by step. I also found the video that mentioned about the screws that may come loose on the baffles. I found several loose screws on the baffles which I tightened and I also found the Drum hole plug loose, so I also tightened the plug. Reassembled the unit and has been working like new since.

Removed two screws that allowed dryer lid to be opened up. That allowed access to door switch which was easily removed (two screws and disconnect switch). Replaced switch, closed lid and replaced two screws. Very east and quick.

Pushed in the Door Catch, and it was fixed.

Had to take 2 screws out of the lint box.Lifted the dryer top and in 3 minutes I was done.I buy all my parts from partselect.A while back I replaced a thermastst in my refrigarator.They even have videos on here to show you if you never work on things befor.

Upon receipt of the new vent kit, I removed the dryer from its location and took it in to the garage. This facilitated a roomier work space. The directions were easy to follow and the work to be performed was very easy in this setting.

I watched the wonderful you tube video, and realized my whirlpool dryer was a bit different than the one used as an example. I first unplugged my dryer. I didn't need the putty knife because I had to take the sides off the top part of dryer that housed all the wires. I just needed a small Phillips head screwdriver for that. There were three screws holding the top of the dryer down, and i took those off with a small socket. Then I just slid the top of the dryer forward, took the top completely off, and there was the door switch on the upper left side. I unscrewed the switch from the dryer because I couldn't get it apart until I did. That was the hardest part of the whole process--pullining the switch apart. I used a flat head screwdriver and pliers to help separate it. At that point, I went online and ordered the door switch from Part Select. I received my part within two days. I put the new switch in, and it worked great--my dryer light also came back on when the new switch was installed. This is the first time I have ever attempted anything like this, but after seeing the video, I felt like I could do it. Just for the record...I am a female and 65!

The video from your website is exactly the steps I followed to remove the old door switch 3 wire and install the new one. Very easy! NOTE: 1 Week before the dryer totally stopped working, my mother opened the dryer door when it finished (sound alert) but, the dryer was still spinning + the light did not come on. I noticed that the small black lever (part of the door switch wire which sticks out & presses against the door when the door is closed) was extremely loose. It seemed as if the lever was broken (perhaps the last time I used the dryer the door slipped from my hand and broke the black piece). Video tutorial was great!

I watched a video from Parts Select and learned that most problems with gas dryers revolve around two things: a broken door switch and a burnt fuse. I knew my door switch was broken. So I figured out how to lift the top of the dryer (unscrew two bolts in the back and two screws under the lint screen) and pry the hood open.) The switch was right there, held in place by two screws in the door frame. I received the part I ordered the next day, on the simple ground delivery. I replaced the door switch, closed the lid, tighten everything down. Problem solved for $15!

Remove Lint filter remove two screws that hold lint trap to top of dryer.Use putty knife to push on two top clips that hold top of dryer down on body of dryer.Lift top and locate door wire that go to switch,romove two screws that hold switch unplug three prong connector plug in new switch and reverse disassembly instructions.

Just put the new lint filter in.

Ordered part ( door latch ) flowed instructions easily fixed same.

replaced with new one which had been improved upon by a brace down the middle of the screen.