MDE11CSAGL Maytag Dryer - Parts
Keep searches simple, eg. "belt" or "pump".
Front or Rear Drum Felt Seal
PartSelect #: PS11740771
Manufacturer #: WP314820
This front or rear dryer drum felt seal is seventy-nine and a half inches long.
$29.00
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
High Limit Thermostat (Limit: 200-30)
PartSelect #: PS11740647
Manufacturer #: WP303396
This high limit/safety thermostat is used on many of Maytag's brands of gas and electric clothes dryers. With this thermostat, a dryer's heating element will cut out if the internal temperature reache...
$43.28
In Stock
Blower Wheel Clamp
PartSelect #: PS11740752
Manufacturer #: WP312967
This blower wheel clamp, used in a clothes dryer, is a clamp that holds the blower wheel to the motor shaft. This part helps hold the blower wheel in place to function easily and properly. If your clo...
$13.61
In Stock
Rubber Foot Pad
PartSelect #: PS11738859
Manufacturer #: WP210684
The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is ju...
$15.28
In Stock
Idler Shaft Retaining Ring
PartSelect #: PS11741848
Manufacturer #: WP354987
This idler shaft retaining ring is well under an inch long and is made of metal.
$14.37
In Stock
Cycling Thermostat - Limit 135/155
PartSelect #: PS11743793
Manufacturer #: WP694674
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 de...
$57.32
In Stock
Roller Shaft Hex Nut
PartSelect #: PS11741054
Manufacturer #: WP33001443
This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.
$5.36
In Stock
Adjustable Leveling Leg
PartSelect #: PS2021026
Manufacturer #: 22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs ...
$18.47
In Stock
Spring Retaining Clip
PartSelect #: PS11739294
Manufacturer #: WP22001650
This spring retaining clip is just under 1 inch long. The clip is made entirely of metal and is attached to the back wall of the washer, under the console. If your washer is vibrating and louder than ...
$11.10
In Stock
Idler Arm Screw Sleeve
PartSelect #: PS11740802
Manufacturer #: WP315772
This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.
$13.61
In Stock
Idler Pulley Arm
PartSelect #: PS11743027
Manufacturer #: WP6-3033630
A dryer's idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.
$56.25
In Stock