Models > MDE10CSACL

MDE10CSACL Maytag Dryer - Overview

Get Parts and Repair Help for MDE10CSACL

If you know the dryer repair part you need, you can browse the list of all parts on the MDE10CSACL, or you can search by name or part description. You can also find your part by where it is located on the MDE10CSACL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE10CSACL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.73

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$16.24

Tumbler and Motor Belt

At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.

$12.51

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

$5.94

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$16.68

Blower Wheel with Clip

This comes with a metallic hub clip to hold it firmly in place.

$2.70

Retaining Ring

$13.56

Lint Filter

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$12.38

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette IN
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 465 of 464 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 388 of 396 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Belt broke on old machine.

  • Customer: John from Charlottesville VA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 352 of 436 people found this instruction helpful
1. Removed front of machine (2 screws at the bottom).
2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled ve... read more