MDBH955AWS Maytag Dishwasher - Instructions

Disconnected power to unit. Removed torque screws of inner stainless liner. Removed door latch unit by gently lifting it up and out of bracket. Found the broken latch handle and removed it by gentley popping it out of side socket holes. Installed new handle. Easy Fix. Part was exact replacement.

Disconnect the power. Remove the door pannel. Disonnect the 2 micro switches on the latch assembly. Remove the latch assembly. Compress the latch assembly with the channel locks and insert the new handle pivots which broke on the old one. Reassemble the micro switches and reassemble the door panel.

received the new latch assembly quickly from part select.com, when you remove the screws on inside of the door, the old latch needs to be disconected from the wire harness, then replaced with new assembly and screws.10 minute job and it could not have been any easier to complete.

Just like you describe in the online instructions. Disconnected the power supply, removed door screws (torex),romoved electrical connections from old switch, installed them on new switch, aligned door screw holes, and reassembled. As a long time do-it yourselfer, this is one of the best experiences that I have had over the years. The part arrive by ground Fedex the day after I ordered it.As the MAN said "I'll be back" for my other appliance parts when needed.

Remove door panel, remove old latch, install new latch, replace door panel. Couldn't have been easier.

remove nine 5/8" long torx head screws, lift out door latch assembly and disconnect spade connectors from 2 switches. This took a little levering from a flat screwdriver. Reverse procedure. Install replacement assembly by inserting spade connector and placing assembly in door. reinstall nine torx screws, two of which hold the reinstalled door latch. Hardest part of this job was to your knees while removing the screws.

I simply followed the instructions on your video repair site!1

I am very impressed with Partselect.com! Your easy to use website made finding the part easy. THEN your website had detailed photographs of the part on a grid to give me confidence that I had found the correct part.

So, part arrives in a couple days and I immediately return to the website to review the how-to video. Removing the old and replacing the new was a breeze. There was no doubt or second-guessing, the website had all the answers.

Any more appliance work and I will be back!

remove door panel insert new handle part, return door panel, screw in place. done in no time. ordering parts and customer service very helpful.

The video for this repair was helpful, and the only issue that I had was changing the electric connections that are held on tightly with plastic clips that need to be pried open for removal and replacement. MAKE SURE YOU DISCONNECT POWER AT YOUR FUSE BOX!!

Remove about 10 screws. unplug the microswitches on the handle. plug the wires onto the new handle and reinstall.

This was the easiest repair I have ever done! Ordered in a few mins, and received the very next day. Opened the box and installed the two wheels - Done. That was Easy! Thank you so much for such quick service! Most definitely will use your company again in the future.

Unscrewed the internal door lining with star-shaped screwdriver bit (luckily I had it) and replaced the latch assembly. I left the old electric switches: was easier to unhook them than disconnect the wires. Overall much easier than expected.

Just took the dishwasher door apart, took out the old latch (handle) assembly and popped in the new one. If a 74-year-old woman can do it, I'm sure about anyone could. Thanks for the good service.

Took out the old, put in the new. Thank you.