MDBH955AWS Maytag Dishwasher - Instructions

Took the old one out, put the new one in it's place

I thought I would have to buy a new dishwasher, which I could not afford at the time. I did some online research to find out what the problem likely was, went onto your site, and saw the part, watched the instructional video, which ws very informative, as I was able to buy the special screwdriver I needed. I ordered the part. It came two days later. I installed it a few minutes after it arrived, and was doing dishes that night! Thank you!

Once disassembly was done, it wasn't that difficult. Had to hand screw everything back,

removed seven of the nine door panel fasteners, separated the panel at the top, removed power leads from old part and attached to the new, replaced fasteners

Just took the basket out of the box and put it in the disjwasher.

Hello guys...this is really too easy to report!

Discovered problem Saturday order part arrived Tuesday, great service. Unscrewed torque screws left inner cover on. Used needle nose pliers to take wires off. (they were tight) Put new latch assembly in place connected wires and put screws back in.

Turned off power to dishwasher, then I removed inner panel using a torx screwdriver. Then I just removed the old latch / switch and replaced it with the new.

Used a battery operated screwdriver to remove white inner-door panel. Latch assembly unscrews as inner-door assembly unscrews. Two white wire gromets are pulled off of copper posts on the latch assembly. I needed to pry slightly with a screw driver. Attached the gromets onto the new assembly and then screwed inner panel back to door. Very simple assembly.

Replaced handle and switch.

This was so easy you didn't even need instructions

Removed door panel torx screws using an electric screwdriver (makes for fast removal). Removed old door latch assembly by pulling off 2 connectors. Got the part number from the back of the assembly and ordered it. Got the new assembly in 3 days. Put the assembly in exactly the same as in was taken out. Having the exact same part takes all the guesswork out of doing this fix. Put in and align all the screws, but do not tighten down until they are all in place. Saved at least 100 dollars.

Removed screws that hold door liner in place. Unplugged switch wires and removed latch assembly. Plugged wires onto new assembly. Installed latch into door. Replaced door liner.

OMG! Great online company. Local appliance store was going to chare me 50$ and take 4 days to get it for me. I found Part Select through google and for less than half price the same part was delivered to my front door 28 hrs later! That was using the cheapest shipping too! Awsome company!

Replacing the door handle latch assembly was VERY EASY!! Saved myself and my parents the extra cost of paying someone to do this repair. Who needs a repairman when you have the internet!?! I just followed the directions on the video and had no problem with it. Thanks for posting the video and delivering the part so quickly!