MDB7601AWB Maytag Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door handle broke
Repair was easy. Removed inside liner screws (8 I believe). The only hard part was removing the switch terminal connecting wires. This was a relatively new dishwasher but the switches were literally falling apart. I removed the old latch/switch assembly and put the new one in place. I reattached the wiring connections and put the screws back in. The wife was shocked. She said you just saved us $700! I got the celeb treatment after that! Great part and really great site.
Parts Used:
-
Samuel from Tulsa, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken plastic wheel
I watched the video that this site had, which made the installation a breeze! The only suggestion I have is, all I needed was a wheel, but I had to replace the whole assembly. I wouldn't hesitate in using this site again.
Parts Used:
-
Lisa from Eden Prairie, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The silverware basket fell apart. Realy cheap product
Replaced The part. Picked up the old one and repurposed it in the work shop and dropped in the new one ...no tools needed. The real story here is that this web page existed and I was able to get the exact replacement part I needed delivered to my house.Piece of cake,
Parts Used:
-
Richard from Norfolk, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Silverware basket has broken bottom compartment
Replaced silverware basket. Works as designed. Speedy part delivery and great service!
Parts Used:
-
Scott from Neenah, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Latch failed in closed position
removed the inside stainless cover, about 10 screws with torx heads, unplugged the latch assembly and plugged the new one to the electric circuit (make sure you unplug the dishwasher from the 110 volts plug first) and screwed the inside stainless cover back on.No repairman, no $100.00 bill++++The part was under $40.00 delivered in two days to the door. That simple.
Parts Used:
-
Ron W from Brownsville, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!