MAH5500BWW Maytag Washer - Instructions

Purchased the pump from parts select. Maytag wanted 250.00 for the pump!. Followed previous instructions from this site and had no problems. Washer still does not fully drain. Believe the problem is the filter. Maytag either couldnot/would not tell me me where to replace the filter. There is a spare filter taped to the inside of the washer. Maybe it fits inside the tub, above the outlet tube leading to the pump. Will check and see at a later date, unless I see a response on the website. Thanks.

It was very easy...we ordered the part and it only took a day and a half and it was here.

The repair was very easy after watching the video that was with the part. I will continue to use this site for other repairs that need to be done.

Well, if a picture is worth a thousand words, the repair video is priceless! Without it, this repair would have been more difficult, but it was so easy to follow along with the video while doing the repair. I rated it easy, but the reinstallation of the wire and spring holding the bellow in place requires significant pulling power. It took a couple tries to get it on, but other than that, the rest of it is cake. From start to finish, the job took less than an hour, but set aside some time for cleaning behind the washing machine if you haven't pulled it out in a while! Also, I have to mention that the part I received was an identical genuine Maytag part and not a remanufactured knock off. The fit and finish was perfect.