Models > LHE9800W2 > Instructions

LHE9800W2 Whirlpool Dryer - Instructions

All Instructions for the LHE9800W2
916 - 925 of 925
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
belt broke
replaced belt
Parts Used:
Multi Rib Belt - 92-1/4"
  • Virgil from Angleton, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
drum was not turning
I watched your video and did the job,really no problem. I also cleaned out all the lint and dust will the drum and front were out.
Parts Used:
Idler Pulley Assembly Multi Rib Belt - 92-1/4"
  • John from West Islip, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer belt broke
Watched video on the website and saw how easy it was so ordered the part. Part arrived quickly and had dryer up and running within 15 minutes. Good part good price and good intructional video
Parts Used:
Multi Rib Belt - 92-1/4"
  • mark from montrose, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer Belt Broke
Fortunately this is an easy diagnosis and easy repair. The great PartSelect instructional videos are a HUGE HELP!!
Parts Used:
Multi Rib Belt - 92-1/4"
  • Reid from Cumming, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Belt broke
Went to YouTube It was real easy.
Parts Used:
Multi Rib Belt - 92-1/4"
  • John from Ann Arbor, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
noisy dryer
Repair went fine. Really easy for the most part. Unfortunately it didn't solve my problem. Great place to get parts though. I'm going to continue my search for the source of the noise
Parts Used:
Rear Drum Support Roller Kit
  • Shawn from Brookfield, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Dryer belt broken
Thank you for the the installation tip I received along with the part. The suggestion of removing the front panel to install the belt made the installation go very smoothly.
Parts Used:
Multi Rib Belt - 92-1/4"
  • william from Salem, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
belt broke
I unplugged the dryer then removed 2 Phillips screws from lint trap. Then I popped the top up on each top corner with a screwdriver. I removed the 2 screws holding the front cover. I unclipped the wiring connection and moved the panel. I took out the old belt, put the tensioned back on then put the new belt around the drum and held the drum up with my shoulder then put the belt through the tensioner and put it on the motor spindle by pushing the tensioner back. I put it back together and it worked perfectly. Your video was very helpful. Job was very easy.
Parts Used:
Multi Rib Belt - 92-1/4"
  • Rhonda from Port Lavaca, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer drum stopped turning.
Had my wife call the repair man. Since it was Saturday afternoon, no luck. YouTube help me diagnose the problem. I found that the drum belt slipped off the idler pulley assembly and the assembly was laying on the floor. I noticed that the belt was frayed and was probably stretched out which may be why the belt slipped off in the first place. I glued the frayed pieces of the belt back with gorilla glue and clamps. You Tube helped me mount the idler pulley assembly and string the belt correctly. I then ordered the replacement parts through your website. The parts came to my home in a few days and I will fix the dryer properly when I get a chance.
Parts Used:
Idler Pulley Assembly Multi Rib Belt - 92-1/4"
  • Jesse from Pasadena, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Broken Drive Belt.
The instruction sheet that comes with the parts is excellent. Follow it and all goes well. Be patient and stay away from the sharp sheet metal edges present in all such appliances !!
Parts Used:
Multi Rib Belt - 92-1/4"
  • james from huddleston, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LHE9800W2
916 - 925 of 925
Back to Top