LGV6634DQ1 Whirlpool Dryer - Instructions

video describing repair very helpful. just folling it made the repair easy

Located broken front door safety switch actuator. Ordered new part shown on the diagram. Removed broken part, installed new part, start dryer,runs fine.

replaced stock belt tensioner with one with pulley. i hope that solves my problem. just want to add that you guys saved me a ton of money ! thanks and God Bless

easy to simple and hope it continues to work.

I'm a 68 year old single lady who watched the video and just followed the instructions. Took the back off, tested all the parts involved with heating and the only part that didn't have any continuity was the top part of the thermal cutoff fuse. After receiving the part I removed the old one, put the new one in, put the back on and turned the dryer on. It heated right up. I also had a part that I didn't need and your return dept. made it very easy to return. I love this site. Save me a ton of money.

Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min

By following the repair video available, I took off the top and front panel of my dryer, removed the drum, removed the old drum support rollers, vacuumed out the inside of the dryer (so much lint!), replaced the drum support rollers, and put the dryer back together. Dryer runs like brand new and is very quiet. Repair was extremely easy to do. Got the replacement parts in about 2 business days. PartSelect repair videos make the repair easy too! Lots of satisfaction for a girl to repair her own dryer!

Can't stop laughing about the mistake I almost made, before I even looked on internet I called Sears and scheduled a repair appointment, $80.00 just to have someone come out and tell me what my problem was not to repair it but to tell me whats wrong. And I told them the belt had broken I heard it when it snapped. Long story short version I found your website and entered appliance information, found part for $15.00 but also found on-site video clearly making the needed repair. Clear step by step instructions taking only 8 minutes looked very easy so I took a chance ordered the part two days later part arrived so I went into basement armed with laptop and tools. MAN it was easy.... too easy ....worked out fine video was spot on. Thanks you guys are a great company

removed front cover and turned unit on, igniter would glow red but burner would not start. ordered m series new style coil kit and installed. turned unit on and igniter came on and burner started right away. all thanks to parts select trouble shooting guide.

Remove two screws from lint trap lift top, disconnet wires on front panel. Remove front panel and drum take out two screw from coilvalve remove and replace with new valves.

I was impressed with the fast time the part was delivered. The price was good too. The installation video and instructions did not match my dryer but it was helpful to some extent. The video and instructions being different was not ya'll's fault because of the age of the dryer. It took me so long to change the switch was because of the location and design of the switch. I got it though.

Called partsselect on monday and parts arrived tuesday. The repair is simple to do. I removed the lint filter, opened the top of the dryer, disconnected the door switch, removed the two screws holding the front of the dryer then lifting it up to remove. I removed the broken pulley assembly and belt. I installed the new pulley assembly and belt. Then I reassembled in the reverse order.

We found great video instructions via youtube.com to give us an idea to what might be the problem even before we opened the dryer. Then we opened the dryer top and front door and then removed the belt and drum. We then saw that one of the drum wheels was worn and the rubber part of the wheel was warped off. Once we saw what part we needed we ordered them through PartSelect.com since their wonderful instructions helped us out. Once we received the part we easily removed the old drum wheels and installed the new ones...super easy! Then we had to put the drum back in with the belt. The only "difficult" part was looping the belt around the motor because there was a lot of tension. Once that was set we just put the door back on and then the top! I guess the only snags we had during the process was where exactly to remove screws or pry open certain places b/c every dryer is a little different. I just advice people to really look at their dryer and think about how it is held together instead of just unscrewing everything. We are so glad we found the partselect.com instructions via YouTube.com. We were ready to buy a new dryer but fixing the dryer ended up only costing us $30! Our dryer is so quiet now, just like it is brand new.

when I see its no gas flame, i deduct the flame sensor and the electric coils not fuction, I order tru partselect and that take me like 30 min. to remplaced those parts.

Removed the back panel and observed the Thermal Fuse at the bottom of dryer.One screw and two connectors and changed the fuse. Problem solved and Dryer working again. Easy Fix and Thanks.