Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUIC15NRTS1 > Parts

KUIC15NRTS1 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIC15NRTS1

Below is a list of all parts for the KitchenAid Ice Maker KUIC15NRTS1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIC15NRTS1
1-14 of 135
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$87.13

Condenser Fan Motor Kit

This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move...

$16.11

Ice Machine Cleaner - 16oz

This product is used to clean the inside of your ice machine. It is meant to be used on a freestanding machine, not an ice machine found in your refrigerator. This product may be needed if you notice a buildup of grime or ill-tasting ice. This cleaner is nickel-safe and assists in removing any mineral build-up. It removes scale and deposits safely without causing harm to the appliance. The parts of the machine that it is most commonly used on is the ice machine bin, evaporator, and other parts. This unscented product is 16 ounces and includes instructions directly on the bottle that are easy to follow. It comes in a pack of one and is liquid in consistency.

$136.66

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...

$62.23

Recirculating Pump - 60Hz

A recirculating pump is used with standalone ice cube makers. It circulates the water over the top of the evaporator plate, which produces a layer of ice that is then broken down into ice cubes. If you notice that your ice maker is no longer producing ice or there is no water flowing over the cooling plate, this could be due to the recirculating pump not working. Be sure to keep the pump clean and free of build-up. This pump is 5.75 inches in length, 4.75 inches in width, 4.25 inches in height and weighs 0.81 lbs. This is a genuine OEM appliance part that comes directly from the manufacturer.

$36.88

Thermostat, Bin

This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce ...

$102.21

Water Inlet Valve

This water inlet valve supplies the water needed to both the water dispenser and the ice maker. A block in the valve could be what is keeping your machine from properly dispensing water, or making ice. Before you decide to replace this part, turn the household water supply to this valve off, and remove the input tubing to see if it is clogged. If so, clear the blockage to allow water back into the ice machine. If the ice maker is still not working properly, you may need to replace the water inlet valve. Remember to disconnect the power and water supply to your refrigerator before beginning this repair.

$15.95

Switch, Plunger Grid/Light

The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the do...

$50.19

Temperature Sensor

This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches wide, and includes the necessary wiring connector. You will find this part located in the water pump area of the ice cube maker. The function of this part is to determine the water level within the water reservoir. Once the water level reaches a certain point, the sensor will signal the controls to fill the reservoir.

$34.57

Ice Cutting Grid Wire

This bake element is placed at the bottom of the oven to supply heat and it has push-on terminals. If your baking element is burnt out, the heat is not consistent, or is defective,...

$77.29

Pump, Drain

$24.48

Evaporator Thermistor

Used with free-standing ice cube makers.

$17.80

Drain Fastener Cap

This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This piece will fasten to the bottom of the water pan in your ice maker. It keeps the water in the water pan from leaking into your appliance. If your drain cap is loose or broken, the liquid from the water pan will empty and you will have no ice or very thin ice. Make sure when replacing this part to secure the drain cap tightly.

$4.48

Screw

Sold individually.

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

All Parts for the KUIC15NRTS1
1-14 of 135