Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUIA15NLHS7 > Parts

KUIA15NLHS7 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIA15NLHS7

Below is a list of all parts for the KitchenAid Ice Maker KUIA15NLHS7. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIA15NLHS7
1-14 of 138
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$137.02

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...

$36.88

Thermostat, Bin

This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.

$3.02

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an ...

$15.95

Switch, Plunger Grid/Light

The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.

$92.13

Condenser Fan Motor

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

$35.13

Ice Cutting Grid Wire

There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.

$17.80

Drain Fastener Cap

This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This...

$211.19

Circulation Pump with Motor

The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops onto the cutting grid. The first step in installing this part is to remove the chute, ice scoop bracket, water pan, and head cap screw that holds the plastic cover over the pump. Refer to the manufacturer-approved installation instructions for further guidance and accuracy. Make sure to disconnect and unplug the ice maker from the power source before installing the circulation pump. Remember to wear gloves to protect your hands.

$24.48

Evaporator Thermistor

Used with free-standing ice cube makers.

$32.86

Tube, Plastic

Used with stand alone ice cube makers.

$5.58

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...

$4.48

Screw

Sold individually.

$3.02

Screw

Sold individually.

$13.76

SCOOP

All Parts for the KUIA15NLHS7
1-14 of 138