Below is a list of all parts for the KitchenAid Dishwasher KUDS01IJBS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This is a basket for washing flatware or silverware in your dishwasher.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This part conceals and protects components located beneath the dishwasher tub.
This part is used to cover the chopper blades.
The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
This kit comes with the tines, clips and cup holder. This kit does NOT include adjusters or rollers. They must be ordered separately.
As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.
This part supplies water from the pump outlet at the bottom of the tub to the upper spray arm.
This gray dishrack track stop is located on the upper dishrack track. It refrains the upper dishrack from pulling out too far.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.