KUDI24SEBL1 KitchenAid Dishwasher - Instructions

Replaced parts with new parts. No problem very easy and fit perfectly even though the machine is over 10 years old.

Watched "Steve" install the drain and wash impeller kit and then I did it.

I tried going online to get some diagnostic help and never found a site that had a step by step help plan. I then did a little reading on different sites, to eliminate and perhaps diagnose my problem I use epoxy to glue the impeller(which spun freely) to the screw and it held long enough for me to see how it worked. I surfed sites to find the least expensive drain and wash impeller kit. One site had a cheaper price but I chose Parts Select because of the shipping so the end result was the best results for me. I am not sure but the estimated time was 1.7 or 1.8 days delivery that I did not believe would happen. When I received the parts and did the repair my final time from ordering was less than a day and a half. I could not have done the job myself without the video because the parts were very different. My biggest obstacle, other than my ignorance, was some sort of chemical on the screw that would not allow me to loosen it. I used a dremel to cut the head off and then a torch to heat the stub so I could remove it. After I received the kit I saw a chemical on the screw threads so online research told me heat loosens the chemical. My dishwasher is around 25 years old,I have worked on it three times now and replacing the impeller was the most difficult task to date. Should it last and develop another problem I will go to parts select first and start my quest.

We followed the excellent video until we couldn't remove the outlet impeller because the motor shaft was not being held by the failed impeller. We drilled small holes around the impeller shaft until we could break off the upper part of the pump shell. Then we could hold the motor shaft with a vice-grip pliers by squeezing the shaft of the remaing impeller piece. We then removed the retaining screw and the rest of the impeller. Then evrything went well by following the video. There was still a bit of doubt because we discarded more old parts then expected but the machine now works well and we see no leaks.

Nothing to it. I removed the worn parts and replaced them with the new ones. I did not have instructions and didn't need them.

The hardest part was taking the old upper wrack out. There were no instructions for that.

Unscrewed the spray arm in the center and replaced it with the Middle spray kit. Had to get the entire kit,after first purchasing just the arm. The appliance had changed so I needed to place another order.

My dishwasher quit working the week before Thanksgiving, and to say the least, my wife was quite concerned. I did not know what was wrong, until I found the info on this website, including a how to repair video. I watched the repair video on the website when I ordered the parts. Other than my wash arm being different from what was shown in the video, it went exactly as shown in the video. I'm glad that the video, and the bag with the parts told me that there are fewer parts than originally were installed on the original. The parts looked like they had been redesigned a little, and were easier to assemble. Overall, I will be getting any repair parts I need for other appliance repairs in the future from here. Thank you for making this experience as easy as it was.

I watched your very useful video on how to replace the entire spray arm kit, and I was able to replace and repair my dishwasher in less than 10 minutes for less than $30! My husband and I are amazed at the savings !THANK YOU!

I watched the video for the repair and followed your instructions. In no time I was replacing the upper tray. Easy repair. Thanks for your instructions. HC New Jersey

I never thought I was handy but upon receiving the parts, the job appeared self explanatory. I then watched your video to make sure I was doing it correctly and fabulous! We are selling our house and the thought of having to replace our stainless steal dishwasher was very discerning especially when I knew it just needed replacement parts. Your website displays the different parts your appliance needs and it is great to have a go-to company like yours. You're an awesome company!!! Thank you!!!

very easy to replace, in fact the replacement mount was easier to snap into place then taking the old one off. Hardest part was trying to stabilize the snapped off piece while loosening the mounting screw.

I watched the video and the repair was easy

I removed the upper basket. Using a screwdriver, I removed the old broken part. I clipped on the new part and using screwdriver reattached the spray arm. Then I slid the basket back into the guides. Good as new! I watched your video (twice, actually) and it was exactly what I needed. Excellent instruction, excellent website.

I watched the video then followed the procedure accessing the impeller/grinder from inside the tub. Had I not watched it, I would have torn into it from the bottom by removing the motor, etc. with disastrous results. I was quite depressed when installation of the impeller kit did not resolve the problem. I remembered from the survey that 56% of problems were solved with this kit; BUT, another 24% found that the check valve on the discharge line was the problem. So I removed it and lo and behold, it was partially plugged with broken pieces from the old impeller. The 1 page sheet that comes with the kit is simply a diagram of the parts included, there are no instructions ---- watch the video!!! All said and done, my experience with PartSelect was first class. They are 5 Stars in every category and I would highly recommend them.