KUDE48FXSS4 KitchenAid Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top Spinner fell off during wash cycle
Read comments on-line here. Then removed both drawers, removed one screw from top filler tube. Gently pulled tube down just enough to remove small "button", after first putting a cloth over entire bottom of dishwasher to catch it if it, or screw, fell. Button goes in "pointy side" down. Squeezed new spinner onto button until it "popped" on. Replaced top screw, drawers and ran a load. Worked perfectly. Button was worn out. Would be nice if only button could be purchased.
Parts Used:
-
Charles from The Villages, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!