KUDA22SWWH0 KitchenAid Dishwasher - Instructions

placed on with hand

Removed upper dish basket. Removed old tube. Reshaped female ends of flat new tube to more rounded shape with fingers to match male fitting onto which the tube would fit. Pushed new tube firmly and snugly onto existing fittings. Replaced dish basket.

I took the old one off and slipped the new one on. It really was that easy. No big deal at all!

My folks are 84 and 85. They thought they needed a new dishwasher. For less than $25.00 I fixed it. All it required to cut in 1/2 the old piece and remove it. That was the hard part it wanted to crumble. Then force the ends into the brackets of the dishwaser. Took about 3 minutes. It works perfectly. Thanks to your operator/service person. She explained it perfectly.

Removed old piece from old adapter and attached to new piece. Pushed new piece into receiving pipe and job finished. very easy to install. Directions included in part.

old hose fell off. heated up new hose in hot water one end only and it went right on.

I disconnected the tube. Before connecting the new delivery tube I softened both ends by applying heat from a hair dryer. Both ends of the tube slid right on to the ends and I was back in business!!!

The installation video is excellent. What should have been a simple fix proved to be difficult for me. Perhaps a function of not enough hand strength to "snap" the axles in place. After trying to use a screwdriver to pry open a side enough to slide on and soaking in hot water to make the axles more pliable -- neither of which worked -- I turned the rack on its side, inserted the axle in the opening and then stepped on it. Voila! That worked beautifully and the next two were easy using the "stand-on-it" method. For anyone with a similar issue as far as hand strength, I recommend this method.

Sorry to say that all I did was screw the cap on in about 3 seconds. Not a repair.

Watched "PartSelect" video showing how to remove the old tube and install the new one. Also read what others said about warming the tube with a hair dryer to make the rubber more flexible -- as you had to stretch the rubber to get it to go over the plastic parts that it attached to. I ordered the part around 3 PM and received it around 10:30 AM the next day. Excellent service!

Remove old tube and slip new one in its place. Tube is flexible enough to do this easily. Make sure the side of the tube with the small hole faces down.

slipped the part on by hand

Took off front panel and removed the faulty part, installed the new one and started it up.

I had called an appliance repairman...I gave him the model #- he called me back in 2 seconds and said it was too old.. no parts available.. wanted to charge me $100 to come and look.I found parts select online. the part came in one day... and my handy man/put the new bracket on.. the dishwasher was put in new in 1991 and still works like a charm..thanks thanks