KSSS42MDX05 KitchenAid Refrigerator - Instructions

Put in new motot and control

exactly as shown on the video and it was completed in less than 10 minutes with only a nutdriver; took wife to dinner with the money saved and returned to find ice in bin without the "iceberg" from the prior leak! Thanks for the great parts selection, clear description of problems to help select correct fix and most of all the "how-to" video. I'm a customer for life ! WSD

Removed 3 screws pulled out the old part and replaced it with the new one. Then plugged in the refrigerator and the repair was complete.

Ordered the part and within 8 minutes I had installed it without having to use any of the included wire harnesses. Was making ice within six hours. If you take your time before, review the handy video PartSelect provides online and prepare the work space it should be a snap. I can't say enough good things about the swift delivery and usefulness of the part. Also, best price I could find after shopping competitors. I highly recommend this project, it was easy and should make using your otherwise working refrigerator more enjoyable.

Watched the 'self-help' video on your website. Loosened the 3 sheetmetal screws,loosened the icemaker, unplugged the single connector and did the reverse order with the new icemaker. Very, very easy.

Removed hinged door from front of ice maker. Removed screws from bottom of ice maker. Removed ice maker unit and replaced control board. One pin connection was burnt. Reassembled unit and it works fine.

I decided not to open the package containing the Control and motor asm because the old one looked like it was cycling properly. I chose to try the inlet valve first, so I ordered the inlet valve and returned this part unopened after replacing the valve asm. It took a week to receive this part and just two days to get the valve.

I watched the ice maker installation video and I installed the new ice maker with no problem and was done in less the 30 min. with everything. The ice maker is working great. thank you Fred

I receved the new ice maker and the only problem I had was getting the old ice maker plug disconected from the frig.

When very smoothly, as the video outlined the procedure.

turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb

with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute

Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that

The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY

Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done