KSRG25FKSS16 KitchenAid Refrigerator - Instructions

Watched the informative video of the same repair twice so I would know what to do and the order in which to do it... the video made the removal of the old part and installation of the new part a breeze. Just follow the instructions and anyone could do this home repair, even those not mechanically inclined. Outcome success gave me confidence to do more of these types of repairs myself and save $$.

Unscrewed bolts pulled out motor,unhooked motor,replaced with new motor,put back in and replaced screws..fairly easy..then we had ice that evening!

Video instructions walked me right thru it had no problems.

I found exact instructions on Youtube. Watched the video. Verified that my Control Bracket was in fact broken by partial disassembly. Ordered the part from PartSeclect. Received the part the next day (though I only paid for ground/standard delivery). Installed the part as described in the video using only two screwdrivers and needlenosed pliers within 14 minutes from start to dispensing water again. My water dispensing was interrupted less than 48 hours. Amazing!!! Thank you. It was fun, fun, fun.PaPa43

turn power off, take the little cover on front of ice maker off so you can pull ice maker box out easier, unplug the easy connector ,after this take square cover off you'll see control motor take 3 screws off pull control motor out change new one in ,put them back together.turn power back on .then now Ice Maker will make some after 2 hours .You will SMILING then say ,Oh Yeah. QT good luck to everyone

The online video shortened the learning curve, and the cut the repair time in half.

Removed and replaced retaining clip and installed a new strain relief. Parts arrived in 2 days from the time they were ordered. No problems whats-so-ever. Great doing business with Parts Select again.

I bought the part from Part Select and they sent a video on how to install part.

Put part on /did not see warter come at first had to go a cycal then ice again thanks alot, danny repair guy whanted 46$ to look at part. Good job.

My ice maker has been broken since august 2011. I called my son in law, which is very handy, he looked at the broken ice maker, said he had no clue how to fix it, since its computerized. Searched the internet, found part select website, watched videos, read customers feed back, based on information provided, ordered icemaker control and motor assembly (less than $60. 00), Called my son in law, in less than 10 minutes, part was installed. The next morning the ice bin was full. I am so greatful for your website, and my wonderful son in law.

The video on the website on replacing the Icemaker Assembly is great. I watched it then performed the R&R. It would have taken less than 15 mins but I took the time to clean the components which were reused. The water receiver on the new assembly is taller than the original. Luckily the water outlet in the freezer is rubber so I was able to bend it out of the way so I could slide in the new unit. The wiring plug in the new assembly was installed in reverse of the old one so I had to pull the unit back out, turn the wiring plug upside down, put it back in place then re-install the unit. Had a couple minor changes to make but the video is a great teacher.

Told Wife To Watch The Instructional Movie, Got Me A Beer And Watched Football. She Finished In about Thirty Minutes.Good Job

The icemaker on oour Kenmore was fading fast. Ice was only being harvested once every 4-5 hours instead of every two. Then finally it stopped altogether. I did some research and decide that it was the motor assembly that needed to be replaced. I ordered the part and within 3 days it arrived. Within 45 minutes I replaced the part with the assistance of the youtube video. I am not a Mr. Fix-it but this was fairly straight forward. I am now a hero.

Assumed a broken ice maker motor, since I tried to force a harvest (jumped T-H) and it did not work, and it is 6 years old. Ice maker went in easy, harvested 3 or so times and quit. Forced another harvest (with the bucket on the door, you have to remove the ice maker to jump the points (PITA)wish they could make the jump points more accessible, like on the old units, mounted on the side). worked about 5 times and quit. Next step is the optics, which, as an old computer guy I find it hard to believe that a circuit board is bad intermittently. As an aside, the door jam gets hot, when I believe it is during harvest time. I vacuumed the coils, but it still heats up... only intermittently, coincidence???

internet search