Models > KSCS25FKSS00 > Instructions

KSCS25FKSS00 KitchenAid Refrigerator - Instructions

All Instructions for the KSCS25FKSS00
1246 - 1251 of 1251
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drum vanes were breaking off.
I took ice bin apart to ensure what part I needed. Got Serial # & Model # from inside fridge. Online search for Whirlpool Parts to check out prices. Settled on PartSelect for best price. Quick service too!!! Before putting it all back together, I reviewed the video. It was pretty good. Just left it up & after each couple of steps, I'd look at what was next. Went together with no problem. There could have been more details given, like ensuring that certain things lined up during reassembly. There was dead time when the narrator could have given pointers.
Parts Used:
Ice Bin Auger Drum
  • Ken from Pleasant Grove, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Makes ice then floods bin making huge wad of ice
I removed the 3 screws but also removed the front screw of the left bin rail. This gave more room to maneuver I/M into position. The cover shown with the enclosed instructions does not show an Ice Plus (blower assy.). By removing the two mounting clips fron old unit and snapping on new one blower unit fits as original. Overall a very simple and quick repair. Note: None of the cables Inclosed were used as my harness does not unplug from wall. Thanks for the quick service PartsSelect.
Parts Used:
Replacement Ice Maker
  • Bobby from Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
refrigerator and freezer would stay frozen.
I shut the unit off for about ten hours and when I turned it back on and set the temperatures for the freezer and refrigerator it has been working great.I will keep the part in case it happens again.
Parts Used:
Bi-Metal Defrost Thermostat
  • Jack from Poplarville, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
Was this instruction helpful to you?
Thank you for voting!
The water outlet valve began leaking
Removed the old outlet valve and installed the new outlet valve in less than 15 minutes. Thank You Part Select!
Parts Used:
Dual Outlet Valve Kit
  • Mary from Greenfield, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
direct drive drum broke internally
watched the installation video twice and took my time to make sure all parts were put back together in the right order
Parts Used:
Ice Bin Auger Drum
  • Bruce from Fort Smith, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The Ice Guide and Light Lens were broken.
The parts were on my doorstep the next day. Installed the ice guide as shown in the included instructions. Only needed a screwdriver. The light lens was a no brainer, a snap in installation.
Parts Used:
EveryDrop Water Filter Light Cover Lens Ice Guide
  • Richard from Tyler, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KSCS25FKSS00
1246 - 1251 of 1251