Models > KSC700SS0 > Instructions

KSC700SS0 KitchenAid Slow Cooker - Instructions

All installation instructions for KSC700SS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the slow cooker repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KSC700SS0
1-6 of 6
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bowl of slow cooker developed a hairline crack

  • Customer: David from Oak Ridge NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 23 people found this instruction helpful
Removed & Replaced cracked/cracking bowl with new replacement bowl. Easy Peasy.

cracked pot in roaster

  • Customer: dan from greenfield IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 8 people found this instruction helpful
ordered a new one but it came in two pieces so would not hold any liquid contents or any thing else for that matter.

Had a cracked crock (bowl inner)

  • Customer: Sharol from Carlsbad CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 19 people found this instruction helpful
Threw the broken one away and wash the new one to use.

Replaced inner bowl

  • Customer: William D. from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced inner bowl

inner bowl cracked

  • Customer: Robert L from San Bernardino CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I use my slow cooker all the time and was very unhappy when it broke. looked on your web sit was easy to fined must not be the only one to do break it. but glad to have the part and can use the cooker again. it very hot here and don't use my oven in the summer as the house stays hot I can cook a meat loaf in it comes out great so thank you for the fast service on getting it here fast

THE LID GASKET NEEDED REPLACEMENT

  • Customer: ANTHONY from LAGUNA WOODS CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
1. REMOVED THE OLD GASKET 2. TAKE THE NEW GASKET AND START IN ONE CORNER. HOLDING THE GASHET AND LID IN BOTH HANDS, OPEN THE GASKET WITH YOUR FINGERS AND PULL IT AROUND THE EDGE OF THE LID. KEEP IT TAUGHT AND GO AROUND THE PERIMETER FOLLOWING THE SAME PROCEDURE UNTIL YOU REACH THE LAST CORNER. WHEN THE LAST CORNER IS FITTED, THEN CHECK TO MAKE SURE THAT GASKET IS PROPERLY SEATED ON THE LID. ALL DONE.
All Instructions for the KSC700SS0
1-6 of 6