Models > KGYS677EQ0 > Instructions

KGYS677EQ0 KitchenAid Dryer - Instructions

All Instructions for the KGYS677EQ0
1741 - 1745 of 1745
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Clothes took too long to dry
I replaced gas coils which in my case came as a set and that did the trick.
Parts Used:
M Series New Style Coil Kit
  • Alex from Glenview, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
functioning dryer with no heat
Took it apart, then, put it back together again. Self explanatory model.
Parts Used:
Dryer Thermal Fuse Igniter Kit
  • Linda from Thousand Oaks, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Squeaky Idler Pulley
I watched the video that showed how to do the repair. I did exactly what I was shown on the video, and everything worked the very first time ! It was GREAT ! No more squeaking idle pulley !
Parts Used:
Idler Pulley Assembly
  • Mitchell A. from Hampton, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
drum wouldn't stop turning when door opened
I read your instructions and followed them exactly and I replaced the door switch. I was so proud of myself for being able to fix the dryer and save a lot of money by not having to buy a new one. I ordered the part and it was here in 24 hrs. I am so impressed with this site. I have told others about it and plan to repair my sister-in-law's dryer for her. Thank-you for honest and reliable service.Doris Brazelton
Parts Used:
Dryer Door Switch
  • doris from chattanooga, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer ran but no heat
turn off elec./disconnect at recep.- remove vent pipe- remove back of dryer- remove each part and re-install new part- relaced thermal cut-off, thermostat, fuse, and heat element...time about 30 min. also vacuumed dryer and vent pipe-time less than 15 min.- parts arrived day after they were ordered.
Parts Used:
Dryer Cycling Thermostat
  • Nels from South Haven, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KGYS677EQ0
1741 - 1745 of 1745
Back to Top