KGYL410BAL1 KitchenAid Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer initially had heat but stopped before clothes were dry
I checked all the thermostats and fuses for continuity based on the repair instructions and initially replaced just the thermostat (it was listed as the most likely to stop heat delivery). When that did not work I took a broad approach and replaced both the thermal fuse and the coils/solenoids. It think the problem was with the coils.
Parts Used:
-
William from Verona, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Took too long to dry
Watched the video and followed the directions. It was pretty easy, but, I ended up having to call the repairman anyway. After the heating element was put on we put the cycling thermostat on. I didn't know it, but I put some wires on upside down. I bought a heating element, a cycling thermostat, thermal fuse, and a thermal cut off kit. All that, and I still had to pay a repairman. If you're good with wires, or have some knowledge of appliances this is an easy fix.
Parts Used:
-
Michelle from ALBANY, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
Diagnosed problem , orders parts . Installed parts
Parts Used:
-
Lisa from Wakefield, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!