KFIS20XVBL3 KitchenAid Refrigerator - Instructions

Removed old lid and replaced it with new one. Just had to fit the new lid into the hinge pins.

Followed video instructions online.

After watching the Video on how to replace part, I got to work.. Was a piece of cake to do. Just a few screws and the job was done. I figure that I saved about $125 by doing this easy job myself.

I replaced the broken part. There was one bolt to loosen with a nut driver. I disconnected the original wiring harness, reattached the new harness and reinstalled the hinges, which simply slide into place. Then I reinstalled the small bolt I had removed with the nut driver. The job was with no problems.

Remove pantry drawer, lid, crisper drawers, glass shelf above crisper drawers and shelf holders. Unscrew the 3 hex-head screws that attach the end cap to the side of the fridge. Very carefully pull the end cap away from the side about a centimeter. The end cap is attached to a moving vent piece for the crisper drawers which makes them in to a big L-shape. The vent piece is snapped in to the back panel of the fridge, so those two pieces must be removed together. You need to carefully unsnap the vent piece away from the back panel while holding the entire end cap piece as well. Go slowly and feel your way through it. It is easy if you don't rush. After removing the two pieces that make a big L-shape, detach the vent piece from the end cap piece. Attach the vent piece to the new end cap piece, re-fit it all back into the back panel of the refrigerator and reattach the screws.

I watched your "silent video". I am a 62 year old woman that is very hands on when it comes to tools and power tools. It was very easy.