KFIS20XVBL1 KitchenAid Refrigerator - Instructions

I used a knife blade to slip under the edge of old switch to pray it out of the hole it was inserted into, switched the wires and replaced the new switch into the same hole. It took about five minutes!

Pretty much as described in the video except the drawer slides are held in place with phillips head screws not quarter inch nuts.

I snapped the cover plate to the filter open. Pulled the filter down and twisted counter clock wise to take filter out. I installed the new filter in by inserting the filter and tuning clock wise to secure the filter. I flushed the water for about two minutes and then allowed it to be put back into service.

Followed the video, 5 minutes later new piece installed. Unfortunately, the new plastic is like the old and the same defect could easily recur. thanks

Went on the internet to find someone else with the same problem. I have over 30 Years of Heavy Industrial Air Cond and Refrigeration experience. The troubleshooting was no problem to find the the Control Board failure. Just didn't want to spend $300.00 on the control board on a 3 yr old Stainless Steel side be side Refrigerator. Then we had to wait 6 days for the darn part to arrive. The real difficulty was finding out we had to reprogram the new control board. No directions to reprogram main Control Board came with the part. Also we could not find the original owners manual. (Put up so we could find it later--Right). Had to go to the internet and Google to find the instructions to program the new Control Board. With the CODE #. What a mess.... But we now have cold Ice Cream and Momma is happy.