Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the KitchenAid Dishwasher KDSS21. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
This kit contains two door strikes, and various door catches to service dryer doors that have one or two catches.
This is the axle ONLY. Wheel is sold separately.
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will ...
This is the cap for your rinse aid.
This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.
It does not have a cover for any of the sections, but there is a handle at either end so that you can quickly and easily remove it from your dishwasher.
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
This canning element is typically used for Whirlpool/Kenmore brand electric ranges. This element has a 3/4 raised frame for additional support, 5 turns, and carries 2600 watts. It ...
This set of four dishrack rollers is intended for use with the upper rack of your Whirlpool/KitchenAid brand dishwasher. Each roller is white and an inch in diameter. These rollers are to be used with KD20 and later models of KitchenAid dishwashers.
This upper rack roller retainer kit consists of four complete sets. Each set contains five pieces. Each set screws into the wall of your dishwasher and together they make up the as...
This part releases the doors on the detergent dispenser.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.