KBFS25EWWH3 KitchenAid Refrigerator - Instructions

Remove two hanging drawers (fruit and vegetable). Remove top glass and two supports for the chef's pantry. Removed chef's pantry. Remove three large screws from the pantry end cap (front, middle and rear). The end cap can now be removed. NOTE: The pantry drawer slide will still be attached to the end cap. Once the end cap is removed detach the rail by removing two smaller screws. TIP: Use either a nut driver or socket verses a screw driver it works out better. At this point replace the end cap and install in reverse of removal.

The vertical mullion rail had detached from the plastic panel which was secured to the door of the refrigerator. Three wires were exposed. Plastic panel removed (with the exposed wires), new panel (already attached to the new mullion rail) had wires enclosed in plastic, which were then plugged into a corresponding plug on the refrigerator door. Slide the mullion rail on the plastic hinges (one on top and one on bottom). Tighten the bolt on the plastic panel, and voila! A 5 minute job for this 60 year old female.