KBFS25EVMS00 KitchenAid Refrigerator - Instructions

I tried to remove the old light switch using a putty knife and a hammer. It was hard to compress the plastic tabs to pull it back through the hole, but all of a sudden, the lights came on. I guess banging on the switch freed-up the contacts. The new switch is now a spare part in case I need it.

Easy

Just replaced a water/ice filter..

After receiving the new part almost immediately,using two screw drivers, removed the broken switch from the plastic frame. Be careful not to scratch or otherwise tear the plastic...very pliable. Since the original switch was factory installed and the wires were packed in fiberglass insulation, the switch came out but the wires and clips were still in place and could not reach the new switch. It was necessary to pull them down with bent long nose pliers...used a lot of "pull" but the wires held up.Connected the switch, turned the power on and there was light! Reports from other users really took the uncertainty out of the task.

removed the two drawers. due to the refigerator location, had to remove the door. Then it was just 3 screws and put in the new end cap and then replace drawers and door. Job is done in less than 20 min and the wife is happy again.

My repair was so easy it doesn't need to be posted. However I will take this opportunity to relay how easy the website is to navigate. The shipping is remarkably fast. Look no further. Part Select is the one to bookmark!

Followed the instructions from the excellent video by Steve on your website which made the installation easy.

removed deli tray and produce drawers.removed three screws with nut driver;removed track;trannfered track;reinstalled lefgt end cap.

Simple! Pop the case open. Counterclockwise to remove old filter. Wipe out excess water. Unwrap new filter; remove tab. Place in filter holder; turn clockwise. Close case. Run water to remove air. Couldn't have been easier!

I went online to PartSelect to see how much I'd expect to pay for the ice maker assembly if I called an appliance repairman to fix it. Instead I found an awesome, very well described video on how to do it myself. I ordered the part and paid ground shipping, but received it the next day!! Installation was a breeze (except I got help removing the electrical jacket because it was an awkward angle and I was afraid that I would damage it). The experience did as much for my single, 55 yr. old self esteem as it did for my wallet. Thank you PartSelect! I'll be back!

Repair was very easy. I watched the video and read the descriptions by other customers and it was just as described. Had ice again in about 4 hours and has been working great since.

(1) Watched the PartSelect installation video. (2) Placed Order. Arrived in two days, regular delivery. (3) Opened package. (4) Selected installation tool. (5)Removed old Ice Maker Assemply (6) Replaced w/new. Ice in a couple of hours. Video & order/delivery aside, the entire process took less than 10 minutes including selecting tool and opening package. PartSelect video very helpful.

No instructions with part. Found a picture on line and changed the arm, but it didn't fix the problem. Fairly easy after figured out what needed to be done to get to the part.

After watching the video witch was GREAT help THANK YOU

this was an easy repair. most of the work involved emptying the regrigerator so the shelf bracket could be removed and replaced. acual repair only took 10 minutes. Next time I clean the erfrigeratoe I will be more carefull with the shelves so nothing gets broken. Orereing from your web site was very easy, and having the model number, I'm sure, also helped. very fast delivery on the part I needed