JSD2695KES Jenn-Air Refrigerator - Instructions

I took the glass off the old shelf. I then removed the crisper tray following the old crisper shelf. I put hte new shelf in, which fit perfectly, and replaced the glass and tray. It was super painless and took no time at all....all within 5 mins.

Followed the video as a guideline. It was not exactly as portrayed. My husband and I, being long time do it yourselfer's, were able to get around the differences. There were screws, instead of tabs as pictured in the video, plus had to remove 4 screws instead of one to loosen the old icemaker. After 2 days the icemaker is pumping out loads of ice.

Ordered the new parts, and they arrieved while the wife was away. I removed old ice maker and install new one in about 5 mins. as you really only have to remove 1 nut and unplug. New one fit like a glove. Ice bucket wa broke where it slides into the track. Remove 4 1/4 net screws, installed ice tray feed auger into new tray and installed it back into the frig. Had ice after about 1-2 hours. Parts were pricy but they were exact fits. Parts came in early also.

I performed the replacement just as the video instructed. Very simple repair.

Looked at questions, picked one that applied, ordered suggested part, fix was super easy after watching video, Frig in running, part fixed it. Very excited, Thankyou.

Unscrewed the old filter and screwed in the new one

One mnorning the temp on the frig was in the 50's and the freezer was cold. Tried to get someone to come out and repair with no luck. We purchased a new frig. Then I decided to see if I could repair the old one to use. I wish I had discovered partselect before I bought the new one. First I thought from the web site that it was a overload/relay problem so I ordered it and changed it out and it was very easy. Then that did not correct the problem so I checked further and discovered that it could be the defrost heat element and thermostat. On partselect web site I saw where if your coil is covered in ice that this could be the reason. I ordered them and watched the video of how to change them out. The video is a little misleading because chances are you will not have the room around the coil that it shows on the video and also the element and thermostat will not come as one unit as shown on the video. It is still easy to cut the wires ont he thermostat and install it. The heat element is a little tricky to get out and back in and the clips that holds yours might be a little different and more difficult to do than the video but you can do it. All in all I spent about 160. 00 And the frig is working like new.

I was impressed at how fast the delivery came. Move refrigerator,cut off water & power, detach &* reattach part and test.

I followed the instructions from your video. I did this replacement all by myself. I am a 64 year old woman and have never done anything like this before. It could not have been any easier.

Replaced icemaker and used wire harnnes and plastic cover off old one. Real easy!!

The ice maker change out was easy. The problem was the part came with a different filler cup but the one needed was supplied. Changing to the other cup required taking the ice maker apart and installing the other filler cup. Go to the parts list and find the filler cup. Use instructions found there to change to other cup and then install your ice maker.

Very easy and straightforward Sevice was OUTSTANDING!!!will definately utilize this company in the future!!

My Maytag side by side had stopped making ice suddenly. My wife loves her ice. We were at a loss until we found the Parts Select website. I ordered the new icemaker and the dual water valve. After watching the short installation videos I changed the parts on my refrigerator and in about 45 minutes I heard the sound of ice dropping into the bucket. With the wide selection of part and easy to understand videos we had Ice and my wife was happy. I recommend this site to anyone that wants to repair a malfunctioning appliance

Piece of cake. Took out old filer and put in new one!

First off I had no idea how a fridge worked or where to begin and the troubleshooting section of the manual was a joke. So I took the back panel off made sure the coils underneath were clean. Took out the back panel of the freezer and made sure that nothing was frozen over and I hadn't seen excess water on the floor so ruled that out. I knew the condenser was still running so I took a shot in the dark. Ordered the part and waited for it to arrive. It took me 3 minutes to open the box and install it. Immediately knew it was working replaced the back panel and moved the fridge back.