Models > JP201CB2SS > Instructions

JP201CB2SS General Electric Cooktop - Instructions

All Instructions for the JP201CB2SS
1 - 12 of 12
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Large burner would not heat
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal with.
Parts Used:
Surface Burner - 8 Inch - 2100W
  • Charles from Carthage, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowl from a big box store was too big even though both say 8”.
Ordered the part and set it in.
Parts Used:
Drip Bowl - 8 Inch
  • Kathleen from INCLINE VLG, NV
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip pan was ruined by renter
I ordered a new drip pan. Piece of cake. Stove looks new again.
Parts Used:
Drip Bowl - 8 Inch
  • Karilyn from KEWADIN, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed new drip bowl, was very hard to find one that fit my stove
Installed easily, was most impressed with the speed of delivery and it was the perfect size!!
Parts Used:
Drip Bowl - 8 Inch
  • Rosemary from BROOKFIELD, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old unit was bent and didn't work properly
I unplugged the old unit and plugged in the new one! It works.
Parts Used:
Surface Burner - 8 Inch - 2100W
  • Christine from Danbury, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coils with tips damaged
it was very easy, a few seconds and new range for a cuople of years more!
Parts Used:
Rolled Terminal Surface Unit - 6" - 1250W Surface Burner - 8 Inch - 2100W
  • Jose from The Woodlands, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner broke apart under a pot
Pulled out the burner. Just pulled and out it came. Looked you up online. Crawled around on the floor trying to find the model number. (This was the hardest part of the whole process.) Ordered the part; it came the very next day despite the fact that I didn't order special shipping. Unpacked the part, plugged it in. And it worked!!!!

FABULOUS service. Thank you so much.
Parts Used:
Rolled Terminal Surface Unit - 6" - 1250W
  • Mary from south bristol, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
metal "Y",shape metal long arm attached to burner came loose.holding the coil to burner
just plugged in the two prings into burner into outlet. Very simple and quick.
Parts Used:
Rolled Terminal Surface Unit - 6" - 1250W
  • Audret K, from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Heating Element's Contacts Were Burnout
Quite simple, just plug-in the new one
Parts Used:
Surface Burner - 8 Inch - 2100W
  • Manuel from Quakertown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted out drip pans
Remove burns and remove drip pans and replace with the new drip pans along with the elements.
Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • Douglas E from Easley, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
burner not working light not working
changed burner and replace light receptical. easy job great service from supplier.
Parts Used:
Surface Burner - 8 Inch - 2100W
  • David from Bennington, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Finding a drip pan that fit so that pots could sit level.
Ordered the drip pan from ParSelect.com. Unplugged element and took out old pan. Placed new pan in and replaced element. For the first time in many years, the part fit.
Parts Used:
Drip Bowl - 8 Inch
  • Ann B from Hueytown, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JP201CB2SS
1 - 12 of 12
Back to Top