Models > JGS8850BDB > Instructions

JGS8850BDB Jenn-Air Range - Instructions

All Instructions for the JGS8850BDB
271 - 272 of 272
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bad igniter
Shut off power, pulled oven out, shut off gas, removed racks and bottom cover. Two bolts held the igniter on, remove those and feed the electrical connector plug through the back of the oven and replace igniter. Be sure the bolts are not too rusty as one if them sheared off and I had use a pair of side cutters to hold the screw while I removed the broken section of the screw.
Parts Used:
Oven Igniter - Vertical Mount Bake and Broil
  • James from Barrington, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Missing Oven Rack
I think the installation instructions are fairly self explanatory. This is the second item I've ordered from Parts Select and I'm thrilled with their service. The items are always less expensive than other sites and they deliver what they promise. I would highly recommend them.
Parts Used:
Oven Rack
  • Janine from Hatfield, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JGS8850BDB
271 - 272 of 272