Models
>
JGP970TEK2WW
JGP970TEK2WW General Electric Cooktop - Overview
Sections of the JGP970TEK2WW
[Viewing 2 of 2]
Manuals & Care Guides for JGP970TEK2WW
Click to downloadKeep searches simple, eg. "belt" or "pump".
Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$12.51
In Stock
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.22
In Stock
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
In Stock
LP Orifice - Center
PartSelect #: PS1020519
Manufacturer #: WB28K10288
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually. Size: .74mm
$8.54
In Stock
Questions And Answers for JGP970TEK2WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jb
November 21, 2023
My stove the igniter keeps trying to light I had to unplug it, do I need the igniter module switch if so do you have one
For model number JGP970TEK2WW
Hello Jb, thank you for your question! If your gas stove keeps clicking even after you turn the unit off, the first and most likely culprit is a clogged ignition system. Food scraps and even grease can sometimes become wedged into these systems and cause the stove to click continuously. Also, make sure the burner cap is not out of alignment and the igniter is not wet. If this does not resolve the issue, we would recommend checking the spark ignition switch and harness, part number PS11721440. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Cooktop Igniter Switch and Harness Assembly
$62.44
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the JGP970TEK2WW
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Parts Used:
-
Kathryn from Star City, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After my housecleaner had been here, I noted that 2 of the little rubber feet were missing from the top grates.
I was pretty upset as the grate wobbled, so I went on line and looked for GE Profile parts. To my amazement, I found the little rubber feet quite easily, and within 2 days they were here at my home. I simply had to stick them in the holes; however, I noted that they did not fit real tight, so I removed them and shot a little glue on the
... Read more
m, and they have been in place ever since. Thanks to you guys, I am a happy camper now!!!
Read less
Parts Used:
-
Anne from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
feet keep falling off
Inserted the grate foot into the spot provided; after consulting the parts manuel to insure I was using the proper procedure.
I do use silicone to help hold the foot but it still won't hold
I do use silicone to help hold the foot but it still won't hold
Parts Used:
-
Richard from Stratham, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!