Models
>
JGP963CEKC
JGP963CEKC General Electric Range - Overview
Sections of the JGP963CEKC
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$12.51
In Stock
Top Burner Spark Electrode
PartSelect #: PS952858
Manufacturer #: WB13K10014
The top burner spark electrode, also known as a range surface burner igniter, is designed for use in your gas range. The function of this part is to provide the spark that lights the surface burner. I...
No Longer Available
Burner Head - Medium - 9500
PartSelect #: PS1020327
Manufacturer #: WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will n...
$39.77
In Stock
Small Burner - 5K
PartSelect #: PS3486550
Manufacturer #: WB16K10070
Sold individually.
$41.22
In Stock
Spark Igniter
PartSelect #: PS11736298
Manufacturer #: WB13X27058
Also known as spark electrode. This part helps your burner ignite and produce flame.
$63.66
In Stock
Top Electrode Mounting Clip
PartSelect #: PS3510420
Manufacturer #: WB01K10112
Sold individually.
$13.71
In Stock
Medium Burner Cap
PartSelect #: PS241264
Manufacturer #: WB29K10005
This is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the oth...
No Longer Available
TAUPE - LARGE CAP BURNER REPLACEMENT KIT
PartSelect #: PS16216977
Manufacturer #: WB29X36765
This burner cap is for your gas range. It is gray in color and just over 3 inches in diameter. The burner cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is...
$21.42
In Stock
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
In Stock
Orifice Spud - LP - Left Front & Left Rear
PartSelect #: PS954100
Manufacturer #: WB28K10215
$17.55
In Stock
Orifice Spud - LP - Right Rear
PartSelect #: PS240691
Manufacturer #: WB28K10031
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually. Size: .63mm
$22.21
In Stock
Questions And Answers for JGP963CEKC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JGP963CEKC
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner wouldn't light
I removed the old igniter by working a thin screwdriver under the edge of the igniter, and carefully prying it up. I then used pliers to pull off the electrical wire. Connected up the new igniter, and pushed it back into the hole. A very simple repair.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
Read less
Parts Used:
-
Jeffrey from Freehold, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
50 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Parts Used:
-
Kathryn from Star City, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not lite
openend stove top disconnected wire pushed out old sparker inserted new one closed lid game over
Parts Used:
-
Glen from Kenner, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
23 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!