Models > JGP336WEV2WW

JGP336WEV2WW General Electric Cooktop - Overview

Sections of the JGP336WEV2WW

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Large Burner Drip Bowl – Part Number: WB31K5079
Large Burner Drip Bowl
★★★★★
★★★★★
(4)
PartSelect #: PS244310
Manufacturer #: WB31K5079
This is a replacement drip bowl for your range or oven. The drip bowl sits beneath the burner element and collects any drips or spills. This drip bowl is 8 inches in diameter and is used to replace th...
  No Longer Available
Surface Burner Spark Electrode – Part Number: WB13K18
Surface Burner Spark Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS231276
Manufacturer #: WB13K18
This part helps your burner ignite and produce flame.
$41.95
  In Stock
Medium Burner Drip Bowl – Part Number: WB31K5080
Medium Burner Drip Bowl
★★★★★
★★★★★
(4)
PartSelect #: PS244311
Manufacturer #: WB31K5080
This burner drip bowl is sold individually. It is white on the top side, and black underneath.
$34.52
  In Stock
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
  In Stock
SCREW – Part Number: WB1K5062
SCREW
PartSelect #: PS234148
Manufacturer #: WB1K5062
$11.59
  In Stock
Screw – Part Number: WH2X930
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.22
  In Stock
Burner Grate – Part Number: WB31T10007
Burner Grate
★★★★★
★★★★★
(1)
PartSelect #: PS244391
Manufacturer #: WB31T10007
Sold Individually.
$125.55
  In Stock
Screw – Part Number: WB1M1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$7.76
  In Stock
Small Burner Drip Bowl – Part Number: WB31K5081
Small Burner Drip Bowl
★★★★★
★★★★★
(2)
PartSelect #: PS244312
Manufacturer #: WB31K5081
This burner drip bowl is sold individually. It is white on the top side, and black underneath.
$32.23
  In Stock
Burner Bowl  Seal – Part Number: WB32M10
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
  No Longer Available
Burner Spark Module - 120V 60Hz – Part Number: WB13K25
Burner Spark Module - 120V 60Hz
★★★★★
★★★★★
(3)
PartSelect #: PS231281
Manufacturer #: WB13K25
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
  No Longer Available
Gas Valve Switch – Part Number: WB24T10071
Gas Valve Switch
★★★★★
★★★★★
(1)
PartSelect #: PS236791
Manufacturer #: WB24T10071
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and start the burner.
$43.11
  In Stock

Questions And Answers for JGP336WEV2WW

Be the first to ask our experts a question about this model!

Common Symptoms of the JGP336WEV2WW

[Viewing 3 of 3]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top four burners on oven would not light without using match
Really simple..Opened the top of the oven and followed the four wires hooked to the igniters on the burners to the back of the oven. Unscrewed top section in back of oven. Found spark module screwed to uppper back of oven on right side. Used a nutdriver to take a few screws out of upper back of oven. Unscrewed spark module from oven. There are six wires - four to the burners and two to the power supply....Wires are attached by connectors so didn't have to do anything but pull the connectors off the old spark module one at a time and push them onto the new spark module matching postion of each wire. Screwed spark module back onto back of oven. Screwed back section of oven back onto rear of oven, and that was it. Works perfectly. Saved more than $100 for service call and whatever elevated price they'd charge me for the spark module.
Parts Used:
Burner Spark Module - 120V 60Hz
  • David from Logansport, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
62 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner igniter needed to be replaced
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
Parts Used:
Surface Burner Spark Electrode
  • Thomas from Bloomsbury, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
37 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
Burner Bowl Seal
  • Steve from Broken Arrow, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!