JFC2087HRP Jenn-Air Refrigerator - Instructions

The repair was simple. It was a matter of unpluging the old relay and then pluging in the new one. I almost bought a new refrigerator but after doing alittle reading on this web sight and finding out the most common reason for having the problem I was having I decided to order the relay. It was the problem...$ 70.00 -v- $1400.00. I'm HAPPY !

Removed wiring from old ice maker and install on new. With 2 screws all ready in place hung ice maker on them. Attach wire connector into socket and install bottom screw to hold ice maker. Tighten top 2 screw and put wire guide in place. Drop wire guide down and ice started in 10 mins

We needed to replace both end caps for our Kitchen Aid refrigerator's pantry drawer. Although it seemed that after a few minutes studying your website's illustrations we knew what parts to order, still we doubted ourselves thinking it just seemed somehow too clear considering we were in unknown territory. When we received our parts we were careful to keep the boxes and paperwork together still believing there was no way we were going to be successful. Wrong ! We did indeed have everything we needed and our repair went really smoothly. It was truly a pleasure and so satisfying. Thanks for your illustrations, your how to video and your prompt delivery.

It literally took one minute. Snap off the outside of the old one and sap it back on the new one. Done!

Found Board location and replacement instructions on Appliance Doctor website. Price there was actually 3 $30.00 cheaper.Had to remove light cover to access slots to insert a flat blade screwdriver which you use to depress tabs to unlock control board housing. It then swings down so you can unplug wiring harness's and remove and replace control board. Too early to tell if defrost is working yet.