All Installation Instructions for Jenn-Air Range JES9750AAW

When We Turned On The Oven The Temp. Reading Went Up To 425 And Beeped By No Heat

Disconnected power pulled oven from wall, removed 8 screws from back, unplugged sensor, removed old, attached new, put screws back wow saved me $500. From buying new and $150. For service call

Parts Used:

Long Oven Sensor

DAVID from Cape Coral, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Could not detach wires on each end of the element.

Instructions did not included need to pull oven from wall to access connections. A pro knew what to do, was finished in 10 min!

Parts Used:

Bake Element

Marlene from Merchantville, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Replace heating element in oven

Pulled out broken element, took out screws, put in the new part and inserted it.. My son had to do it though. Easy for him

Parts Used:

Bake Element

Vallie from Morrice, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Bake element broken.

Super easy; pulled out broken element and pushed in new element. Wonerful service, communication, shipping. Received part in Seattle and mailed it to Hawaii installed without a hitch. Thank you

Parts Used:

Bake Element

Maryann from Seatac, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

change oven sensor

Followed provided video

Parts Used:

Long Oven Sensor

Lloyd from Eau Claire, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

super easy

Just followed the instructions in the video!! A repair service was going to charge $95.99 just to walk in the door!!I I just ordered the igniter part. Watched the video and I know I can do that too!! I have only had one self igniting burner for years - didn't want to pay for a service call. Love your company!! Thank you!

Parts Used:

Bake Element

Joanne from West Falls, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The inner glass shattered when the oven was in the clean mode

First I took the door off and outside to dump the glass in the trash which I had some Kevlar gloves so not to get cut. Removed the three screws on the bottom trim piece and the two on the sides remove the outside face glass next remove the four screws that hold the next glass. This glass is in a frame there is bent tab on one corner unbend open frame and install inner glass close frame rebend tab and reinstall all the parts.

Parts Used: