JED8430ADB Jenn-Air Cooktop - Instructions

Item looked exactly as part to be replaced. Knob lifted out, used pliers to remove rest of Knob assembly then lined up the Dr shapes on Knob and cook top and snapped into place. Took all of 30 seconds to do. Knob looks exactly the same as the Knob it replaced.

Aligned the new knob with the cooktop socket and it went on easliy and has worked fine ever since. So thrilled we were able to replace the knob without having to buy an entire new cooktop. The new knob looks different but it is black and so is the cooktop and new cooktops now have different looking controls anyway. Thank you. You were a life saver!

My cook top has the red wire piggybacked along all the cook top switches. It was easy enough to reroute the red wire coming from the dual surface burner to pin 4 i believe on the new switch. Follow the previous thread and look at the instruction sheet online for this switch

Ordered a replacement grease filter.

I merely lifted the downdraft cover and inserted the new screen as
directed. THANK YOU FOR YOUR PROMPT RESPONSE TO MY ORDER.

Followed Igor’s instructions and it was very easy and straightforward. New switches work great.

Used needle nose pliers to remove the remaining broken park from the D connector. Used a little pressure to install the new part on the connector.

We received the new knobs, they were a perfect fit. Installed in less than a minute! Looks like new.

Just placed new filter in slot

Simply removed old knob and replaced.

I used needle nose pliers to remove the broken piece then pushed the new knob on!!

In these hard times it's hard to remodel a well needed room in the house, however we were able to find a brand new electric stove that was worth $600.00 but was on clearance for $150.00 because it was missing the knobs. Thankfully a good friend recommended that I look through your website and I found the knobs for under $50.00. Thanks to partselect I was able to get the electric countertop stove I wanted and saved hundreds of dollars !!!! Thanks partselect.

Lifted off old burner knob and put new burner knob on burner spindle. Took all of about 5 seconds.

This company sent the new part in less than 4 days. Thanks!!!

removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.