JDB4000AWS Jenn-Air Dishwasher - Instructions

Removed inner liner by removing screws, noted problem with handle being broken inside the door. Ordered replacement and swapped out parts. Job was a snap; just remember switches are hot so remove power source to washer before changing the switches.

I watched the video on how to remove and replace the handle, then, using a T20 star screwdriver, I removed the assembly following the steps in the video which let me see what I needed to order. Once I had the new assembly, I repeated the process and replaced the assembly. I used the pliers to pull/pry the wire terminals from the assembly. It was simple because I had seen it all done on the video.

Turned off power to dishwasher, removed screws on inside door panel, disconnected old latch & handle assembly, installed new and reassembled.

I removed the screws holding the inner door panel (approx 8), pulled it back and removed the handle unit from the inside. When I examined the unit I found a pivot/rod holder broken. I wrote down the part number and model etc. Went online and the site described the usual faults reported and ordered the part. It came in within a couple of days. Had unit repaired within 10 minutes.In this day of disposable everything, this was a delight and a surprise. I will buy other Maytag stuff just because this was so easy.

Removed all interior star screws on door. Lifted up door and removed door latch and connections. Plugged in electrical connections on new latch assembly. Put in place and resecured interior door panel. Work perfectly.

Replaced silverware basket

My husband removed the inner door panel to get to the latch, found two little plastic teeth broken. He replaced the entire nandle and latch assembly in case anything else was broken or worn, having to snap the switches in place, secure it to the door and reattach the liner with several screws. That was it. Found the site very easy to navigate, liked the diagrams and feedback. Liked the percentages of what part fixed the problem the best.

took off the cover unpluged the handle & got the new 1 , i was done in 15 min

Had to break latch to open. The new latch was complete with switches and very easy to install. The part arrived in 2 days. Ordered on weekend.....Great service!

To do this repair remove the 8+- star screws holding the plastic inner liner and the metal door front. Remove the electrical connections on the old switch. They are well covered so no need to turn off electricity. I had to give them a good tug but there is no release catch. Plug in the new switch and set in place. Put in all the remaining screws. Works great!

Took old one out & put new one in. Color is a little darker than the old one but the forks & spoons don't know the difference. Great price and was here in 3 days from order.

Good thing there was a Youtube video. It made the repair really easy. The part was a perfect fit.

handle and door latch assembly with switches replaced

Took the old one out, put the new one in it's place

I thought I would have to buy a new dishwasher, which I could not afford at the time. I did some online research to find out what the problem likely was, went onto your site, and saw the part, watched the instructional video, which ws very informative, as I was able to buy the special screwdriver I needed. I ordered the part. It came two days later. I installed it a few minutes after it arrived, and was doing dishes that night! Thank you!