JDB2150AWP Jenn-Air Dishwasher - Instructions

I Googled parts for an Electrolux wheel and Parts Select came out with a picture that confirms the one that I need. The price of the item was very reasonable as compared to the official website of the manufacturer. I like what I saw and bougt 4pcs instead. I will recommend Part Select to my friends without hesitation.

Removed the bottom spray arm, the filter cover the filter ane the impeller. Then put it back together. Worked like a champ.

The troubleshooting and repair videos made locationg the problem and ordering the proper replacement part was easy. The repair video took me through the entire process.

Watched a brief video online at PartSelect site. Video was easy to follow and there were no surprises as I followed the instructions.. I highly recommend the PartSelect company. Herb Wise

Pulled dishwasher out of cabinet. Layed it face down on a rug. It was very simple to remove the old water inlet valve. Following the video I saw on line was a big help. I put the new valve in its place, stood up the dishwasher,turned on the water and everything was fine. Put the dishwasher back in the cabinet,there were 2 screws that fastened the dishwasher to the cabinet.Very simple.

Aligned the hole and the appropriate part of the wash arm and snapped them back in. Thanks.

With dishwasher removed from cabinet, I next removed the dishwasher racks and with a large adjustable wrench turned the vent cover (located on side wall) inside the dishwasher counter-clockwise a quarter of a turn or so and removed the vent cover and then air/ water inlet unit from the outside of the machine. I cleaned the unit and washer wall area prior to replacing the gasket. Replaced the gasket in the air/water inlet vent and reassembled in reverse order. Entire gasket replacement repair took about 5 minutes or less. Most of the time in this project is spent removing and then replacing the dishwasher in the cabinet cavity. My total project time was about 30 minutes.

I watched the youtube video and followed the steps. The first time I tried it without taking the motor out because I didn't want to spill water on the floor, but I wasn't able to tighten the new motor shaft all the way so nothing lined up and it didn't work. Second time I followed instructions exactly and it worked like a charm. This is the second repair I have made to this dishwasher that was given to me for free because the door latch was broken. I fixed that problem for around $12.00. This time it broke because something metal got jammed in the motor causing the threaded shaft to strip. This repair cost around $80.00. Still the cheapest, nicest dishwasher that I could ask for. A+++ for partselect.com on price, service, and delivery. Thanks.

out with the old in with the new

Removed the dishwasher from under the counter. Turned dishwasher on side. Placed new drain pump from Parts Select into position. Replaced and tightened screws on drain pump. Reconnected hosing and electric. Stood dishwasher back up. Placed dishwasher back under counter. Turned on electric to dishwasher. Checked to see if dishwasher powered up. Turned on water supply valve to dishwasher. Set screws to hold dishwasher in place under counter. Loaded dishwasher with a few dishes and washed them. Worked perfectly. Parts were easy to find on Parts Select. Delivery was very fast.

I simply removed old lower dishrack from dishwasher and discarded. Then I removed new lower dishrack from box and installed it into dishwasher, no tools necessary. How easy is that?! New lower dishrack is a perfect replacement and now our dishwasher is good to go. Thank you PartSelect for your fast service.

replaced basket with a new one, so easy even a cave man could do it.....i think.......

The original problem that brought me to Parts select was a broken wheel on the top tray. While searching for part #s I came across several descriptions of dishes not clean . The videos available on line here were very detailed. This encouraged me to go ahead and order the parts. They arrived soon and were accurate to my order. The video on replacing the seal and chopper walked me through the entire job very clearly. Going slow and carefully keeping track of al screws I replaced the chopper, impeller and the filter. The filter did have a tear in the screening which allowed dirty water back up into the dishwasher.

I put the new one in and that was all

Pulled the dishwasher out from the counter. Wiring and supply hose were long enough that I did not need to disconnect them. Suspected a leak in the injector hose but the evidence was circumstantial. That is mineral deposits collected around the area where the house connects to a small plastic box and then into the dishwasher. I replaced the hose in a few minutes and added a clamp on the box side where no clamp was called for. So far, no leaks.