Models > JDB1090AWS > Instructions

JDB1090AWS Jenn-Air Dishwasher - Instructions

All Instructions for the JDB1090AWS
361 - 363 of 363
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher Did Not Clean And Drain Properly
Routine repair. There are videos on the net that show exactly how to replace the filter unit. However, when you order the filter, order a replacement pump impeller. The impeller must be removed to remove the filter on this model. The impeller was stuck on the shaft, and I had to destroy it with the side cutter pliers to get it off. Before putting the new one on, clean the pump shaft thoroughly and lube the shaft with silicon lube or vaseline jelly. Clean the bottom of the water pan thoroughly, then reassemble. Then pour one cup of vinegar in the bottom of the dishwasher and run it with no dishes. This will clean the inside of the dishwasher.
Parts Used:
Accumulator Filter
  • Noel from Orange, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The Old Silverware Basket Had Holes In It.
I replaced the old one with a new one.
Parts Used:
Silverware Basket - Gray
  • Janet from Greenwich, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
silverware basket broken
lifted old one out put new one in
Parts Used:
Silverware Basket - Gray
  • Timothy from WHITE CLOUD, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JDB1090AWS
361 - 363 of 363