Below is a list of all Roper Ice Maker parts for the models starting with IMKIT. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
Also known as a Water Solenoid Valve.
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.
This kit comes with a fill tube and a compression nut.
This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
This compression nut is used with the plastic water line of the icemaker assembly.
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
These inserts are used with 1/4 inch plastic tubing.
Also known as Alumilastic Cement.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.