HVM1750DM1CC General Electric Microwave - Instructions

The old part was already removed; however a broken piece was left behind. Removed the part from the package and snapped it onto the rotating base and presto it was fixed!

Ordered a new coupler. The new one had a little bit longer post and it wouldn't go down into the hole far enough so my husband just sawed about 1/4 in off and pushed it into the hole. Has worked perfect since. Very simple.

I realized the turntable coupler had broken, but part of it was still in place. I read most of the other installation instructions, and pulled the coupler off. I did not use any tools other than the vacuum. Then I used my wet/dry vac to try to get the broken piece out that had fallen to the bottom of the microwave. I was unable to get it out. I put the new coupler in place (has a half moon base you should line up with the center) and I pushed down until I heard a click. Turntable works good as new! Simple, easy, if I can do this, anyone can. Reading the other responses was helpful. Easy order/quick delivery. Would recommend to friends/family.

Popped the coupler on and put the cooking tray on top of the coupler.

it was a simple screw in on both ends. no soldering