Quick Question!

Have you ever purchased from PartSelect.com before?

Models > HDA150V-60BW > Parts

HDA150V-60BW Hotpoint Dishwasher - Parts

All parts for the Hotpoint Dishwasher HDA150V-60BW

Below is a list of all parts for the Hotpoint Dishwasher HDA150V-60BW. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the HDA150V-60BW
1-14 of 123
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$0.72

RACK SLIDE END CAP

This part attaches to the rails, for the upper rack, to prevent the dishrack from sliding all the way out.

$17.66

Lower Rack Wheel Kit - 8 Pack

This kit includes the 8 wheels and 8 axles.

$10.32

Upper Roller and Axle - Kit of 4

This is a kit if 4.

$7.75

Corner Tub Baffle - Lower Right

This baffle fits the lower right hand corner of some dishwashers. It is black and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and right at the same time.

$7.68

Corner Tub Baffle - Lower Left

The left and right side baffles should be installed/replaced at the same time. Right side baffle is sold separately.

$14.44

Silverware Basket

This silverware basket is gray.

$9.52

Lower Front Dishrack Wheel

This wheel is located on the front lower rack. It includes the axle. Sold individually.

$11.17

Interlock Switch

This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.

$17.11

Drain Valve Shaft Seal

$8.79

Door Cable and Eyelet

This part is sold individually. It is recommended that both sides are changed when replacing one.

$3.35

Push On Nut

$5.04

White Track Roller Kit

This upper track roller kit comes with a screw for easy assembly.

$10.64

Rinse Aid Fill Cap

This part helps keep the rinse aid the dispenser until its needed.

$24.44

Water Inlet Valve

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

All Parts for the HDA150V-60BW
1-14 of 123