HBXR1060T0WW Hotpoint Washer - Parts

Hub Nut

★★★★★

★★★★★

(6)

This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. T... Add to cart

Tub Bearing

★★★★★

★★★★★

(2)

This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you... Add to cart

Hub Washer

★★★★★

★★★★★

(2)

This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under... Add to cart

Pump to Tub Inlet Drain Hose

★★★★★

★★★★★

(8)

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide. Add to cart

Water Level Pressure Switch

★★★★★

★★★★★

(6)

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the corre... Add to cart

Water Pressure Switch Hose

★★★★★

★★★★★

(11)

This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, s... Add to cart

Temperature Switch - 3 Position

★★★★★

★★★★★

(16)

Also known as a Rotary Switch. This part regulates the temperature of the water in the tub. Add to cart

Timer Knob with Clip

★★★★★

★★★★★

(6)

This part is the replacement timer knob for your washer. It is made of white plastic and is about 1 ¼ inches in diameter. The timer knob sits on the timer shaft and allows you to choose the wash cycle...

Agitator

★★★★★

★★★★★

(1)

This part does not include the agitator cap. Must order separately. Add to cart

Water Fill Nozzle

★★★★★

★★★★★

(6)

This part is the replacement water fill nozzle for your washer. It is white and tan in color, made of plastic, and is approximately 7 inches long and 4 inches wide. The water fill nozzle is also known... Add to cart

Lid Switch Actuator

★★★★★

★★★★★

(1)

This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.

Clutch and Retaining Clip

★★★★★

★★★★★

(2)

This part is used with units that have a removable front panel.