Models > GZ2626GEKB13 > Instructions

GZ2626GEKB13 Maytag Refrigerator - Instructions

All Instructions for the GZ2626GEKB13
196 - 202 of 202
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installing the Ice and Water Filter
Take filter out of the box and open the refrigerator. Open the housing in the frig that holds the filter and twist the light-blue piece 1/4 turn, counter-clockwise. (Put the light-blue piece in a safe place.) Take foil away from filter. With 1/4 turn in the clockwise direction, twist the filter into its position. Let five gallons run through the system to get fresh, filtered water.
Parts Used:
Refrigerator Water Filter
  • Daniel from Chicago Heights, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old Filter Kept Falling Down.
Simply replaced cover by hand. No tools required.
Parts Used:
Water Filter Cover
  • Jay from Apopka, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken fan blade
unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.
Parts Used:
Fan Blade
  • David from Ceres, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no problem
Replaced the water filter with the bypass plug. The water in western NC is perfect out of the faucet.
Parts Used:
Refrigerator Water Filter Bypass
  • Ron from Otto, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
switch that turns light on in refridge broke
watched the video how to remove, and did it.
Parts Used:
SWITCH
  • Edgar from Kokomo, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Light switch broke
Pulled out old switch with needle nose pliers, unplugged old switch and plugged in the new one and snapped back into place. Very easy to repair. Took less than 10 minutes
Parts Used:
SWITCH
  • Joanne from Bourbonnais, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
one of the fan blades was broke causing it to vibrate
removed the back cover unplugged the unit removed the old fan blades installed the new easy to pull off and easy to install
Parts Used:
Fan Blade
  • michael from westminster, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GZ2626GEKB13
196 - 202 of 202
Back to Top